How To Clean Bugs Off Car With WD40

Bug splatters are so fixed that they can also damage your car’s paint finish. If you have WD40 in your garage, you can use it as an effective substitute for bug remover. Let’s see how to use WD40 to remove bugs from your car at home. Now we will show you how to clean bugs off car with WD40 at home.

Bug Infestation In Car

Bugs in the car are very popular if you live in a bug infested area. If you live in Florida or Louisiana, for example, you will be subjected to this condition twice a year.

So far, the love bug has become the most frequent source of bug attacks on vehicles. While on the upper surface you can see various bugs, such as beetles. In any case, both bugs exist on the top or bumper of the car. So why is it so difficult to get rid of them?

It is not difficult to remove bugs from the surface of the car. However, if dead insects remain on the surface of the car for an extended period of time, problems can arise. Dead bugs can effectively dry with the car’s paint and stick to the top of the vehicle, making it incredibly difficult to wash.

In addition, using any traditional method to remove bugs carries significant risk. Since the decomposed bugs can dry and seep into the paint, it will cause damage to the car’s paint. Whenever you try to extract stubborn bugs from your car’s surface with corrosive chemicals, you will end up damaging the paint.

So the challenge is how to remove bug stains effectively and efficiently. Traditional bug cleaners, tar removers and degreasing agents are just a few options. Both of these work great if kept in-house, and other options can be pursued as well.

How To Clean Bugs Off Car With WD40

WD 40, as stated above, is also very good at removing bed bugs from vehicles without damaging the paint. Some of you may have reservations about this method, but it works! Let’s see how to fix the problem with WD 40 alone.

Step 1; Wash Your Car

Before applying WD 40, you should take some precautions to avoid making any mistakes. To do this, start by washing the car. Using soap and water, properly clean the vehicle. Clean the surface and get rid of any bugs that have not yet adhered to the paint.

If your vehicle is dusty and you don’t wash it often, cleaning will allow you to see the affected area more clearly. It will also help eradicate vulnerabilities in real time.

Step 2: Apply WD40

At this stage you can use some insect removal software, but we are going to use WD40. The bug remover is mainly made to remove the remains of bugs that have been applied to the surface of the car.

Acid decomposition bugs are common. Therefore, these bug removers are very effective in removing bugs and acidic stains from vehicles. The bug remover should be used especially if the bug stains are new but have not yet dried. However, we have opted for WD40 because it is readily available.

To use WD 40 to remove bugs from vehicles, one must first add the substance to the affected region. The fact that WD40 comes in a spray bottle makes one feel more comfortable when using it. Let the substance sit for a few minutes after applying it.

WD 40 is a penetrating oil that can penetrate the surface and have a deep cleaning effect, as you already know. The reason for using WD 40 is that it is a fantastic solvent that not only cleans the surface but also protects it from insect corrosion due to its acidic residue.

In any case, WD 40 will destroy any bugs on the car body, including the bumper, in a matter of minutes. Wipe off the WD 40 with a dry cloth before washing the engine again.

You may need to reapply the product. Even a single application is not enough to get rid of the error spot. Repeat this step as needed until you are satisfied with the results, then give the car a final wash. It is important to make sure the surface of the car is free of residue.

Step 3: Apply Car Wax

The last step is to add car wax to the surface of the vehicle. Applying a coat of car wax actually results in the elimination of possible bug infestations on the engine. As a result, acidic debris would not affect the car’s paint coat.

Another excuse for applying car wax is to replace the old car wax coating on your car, in addition to protecting it. Actually, using WD 40 several times will strip the wax coating from the vehicle, which will make you have to repaint the paint surface.

Protecting Your Car from Bug Stains

While it is important to know how to remove bug stains from your vehicle, it is also important to know how to keep your car clean.

This way, washing your car will be faster in the long run.

Protective coatings: They usually take the form of a solution sprayed onto the car. These materials come in a variety of shapes and sizes, but they all work by making the surface of the car cleaner so that insects do not adhere to the paint.

Protective films: These films, also known as translucent fasteners, can be added to the car temporarily to keep it painted. They prevent insects from staining the vehicle, as they adhere to the film and not to the surface. Obviously, you will need a specialist to apply them to achieve the best results.

Painter’s tape: You should cover the bumper with painter’s tape if you don’t mind losing elegance and don’t mind driving for a long time. Since the bugs stick to the tape and not to the surface of the car, all you have to do to get rid of them is cut the tape.


Insects that resist can be extracted from the vehicle in this way. Remember to wash the car daily to avoid frequent insect attacks. – see you next time!